Search found 12 matches

Ok I've measured each connection and looking top left top most pin and next one I get zero ohms nothing on others until I get to the last two above the speaker wire and I get some resistance but not z ...

The 5 top pins are not responsible for the vertical lines! I made a scheme for you:
http://www.retrospace.nl/crazykongpcb.jpg
Green pins are for the emitting wires, and they should have around -27V ...

Still having the problem?
Check the solder points on the VFD tube. Mine had a few corroded ones resulting in some lines not showing at all. Maybe yours has a few that are connected wrongly. Look at t ...

Many many thanks Rik, I got the parcel this morning.
I've put the 152 in but I still don't have a working game. See below.
http://img823.imageshack.us/img823/1333/photo0054.th.jpghttp://img816.image ...

Thanks Rik,

I cannot believe these items have been so hard to locate.
I have even tried some of the independents but it looks like these components are imported from Japan or the US and then this ...

Strange, D789C was the original.
The photo was the replacement that I tried - similar - nearest I could find BC639 but obviously not the original.
I cannot get a NTE315 - I'll look for a NTE152 an ...

Rik,

Just to be sure I've posted some photo's below:

http://img687.imageshack.us/img687/1853/photo0044v.jpghttp://img4.imageshack.us/img4/8336/photo0045k.jpg

So long as they fit I'd like to ...

Rik,
Did you ever get any of these components ?
Still unable to source in the U.K. !!

Yes please Rik. Still no joy over the pond.
Check your pm inbox for details.
Thanks.

I cannot source this component over here in the UK. Sad

I searched Frys.com as suggested but NTE315 returns only NTE31 & NTE311 - so looks like even they don't stock it !!

Any alternatives or h ...

Thanks Rik,
I'm going to try a BC639 - nearest equivalent I can find over the pond here, without going to the expense of shipping the exact item from the US. Unless of course you know a UK equivalent ...

Hi,
First post be gentle, I did look for a repair section to the forum as there was one on the webiste but decided to post here - apologies if that is considered wrong.
As the subject suggests :
I ...